Tissue machines run at extreme speeds (1,800–2,200 m/min) with ultra-light basis weights (13–40 g/m²) on Yankee cylinder dryers operating at 180–200°C. At these speeds, even microscopic fabric surface irregularities transfer to the sheet — creating marks that destroy tissue softness and consumer product quality. Standard dryer fabrics also struggle with dimensional stability at 2,000+ m/min, causing sheet flutter, edge wrinkling, and frequent breaks during grade changes. Tissue mills need dryer fabrics engineered for high-speed stability, mark-free surfaces, and the unique drying dynamics of Yankee + through-air drying (TAD) configurations.
Tissue machines run at extreme speeds (1,800–2,200 m/min) with ultra-light basis weights (13–40 g/m²) on Yankee cylinder dryers operating at 180–200°C. At these speeds, even microscopic fabric surface irregularities transfer to the sheet — creating marks that destroy tissue softness and consumer product quality. Standard dryer fabrics also struggle with dimensional stability at 2,000+ m/min, causing sheet flutter, edge wrinkling, and frequent breaks during grade changes. Tissue mills need dryer fabrics engineered for high-speed stability, mark-free surfaces, and the unique drying dynamics of Yankee + through-air drying (TAD) configurations.
Hidden Costs
Downtime, energy waste, and sheet defects from suboptimal fabricsEfficiency Loss
Generic solutions don't match your specific operating conditionsDecision Delay
Procurement cycles stretch without engineering-grade selection guidancePAPTEX Polyester Dryer Fabric — Flat Yarn Series (PAPTEX-FY-4500) is engineered for the punishing speed and surface-finish demands of tissue machines. The ultra-smooth flat yarn weave eliminates sheet-side marking — critical for preserving tissue softness and consumer hand-feel. 100% PET monofilament construction maintains dimensional stability at continuous 200°C operation and 2,200 m/min line speeds. Precision-calibrated air permeability (350–500 CFM for tissue) ensures uniform moisture removal across both Yankee cylinder and TAD dryer sections. Each fabric is custom-manufactured to your tissue machine dimensions with pin seam installation for minimal grade-change downtime.
Ultra-smooth flat yarn surface — zero sheet marking, preserves tissue softness and bulk
Dimensional stability at 2,200 m/min — no edge flutter, no sheet breaks during grade changes
Continuous 200°C operation — designed for Yankee cylinder dryer peak temperatures
Precision CFM calibration (350–500) for both Yankee and TAD dryer configurations
Pin seam with ≥ 85% strength retention — fast changeover between ply-count and basis-weight grade runs
100% Polyester (PET) Monofilament
400 – 1,200 m/min
6 – 14 months (varies by paper grade and operating conditions)
12 – 400 g/m²
Core parameters for Polyester Dryer Fabric. See the product decision page for complete specifications.
| Material | 100% Polyester (PET) Monofilament |
| Construction | Flat yarn, multi-shed weave |
| Air Permeability | 350 – 650 CFM (at 125 Pa, ISO 9237) |
| Continuous Operating Temperature | Up to 180°C |
| Peak Temperature | 200°C (≤ 15 minutes) |
| Tensile Strength (Warp) | ≥ 80 kN/m |
| Tensile Strength (Weft) | ≥ 45 kN/m |
| Elongation at Break (Warp) | ≤ 2.5% at 80 kN/m |
Compatible Machine Brands
Compared to standard polyester dryer fabrics, PAPTEX Flat Yarn Series delivers the surface smoothness and high-speed dimensional stability that tissue production demands. ± 0.05 mm caliper tolerance ensures mark-free sheet contact (industry typical ± 0.10 mm introduces marking risk at tissue grammages). 20+ QC inspection points per fabric verify surface uniformity before shipment. Factory-direct pricing with no distributor margin means tissue mills get Yankee-grade fabric performance at competitive cost per ton of tissue produced.
vs Competitors
In-House Manufacturing
120,000 m² factory, 500+ employees. Every step in-house — no outsourcing.Engineered to Your Machine
38+ senior engineers custom-design to your machine brand, model, and speed. Not off-the-shelf.Triple ISO Certified
ISO 9001 Quality · ISO 14001 Environmental · ISO 45001 Safety. 29+ patents.Global Support
Serving 30+ countries. Engineer response within 24 hours for technical inquiries.Engineering answers to the most common pre-purchase questions
Didn't find your question? Ask an engineer directly.
Ask an EngineerDive deeper into the technical topics on this page — expert articles from the PAPTEX Knowledge Center
Explore other dryer fabric solutions for the same product — by grade, brand, speed, industry, or common problem
Send us your tissue machine parameters (machine type, speed, basis-weight range, ply count, and Yankee diameter). Our application engineer responds within 24 hours with a dryer fabric recommendation: surface-finish specification, CFM calculation for your Yankee/TAD configuration, seam selection, and competitive quotation.