1 / 1
Forming Fabric
PAPTEX SSB Triple Layer Forming Fabric (High-Speed Dewatering)
Model: PT-3CSSB5220 · 2/5 Satin SSB (Surface-Support-Binder) triple-layer structure. Paper side: 2-satin plain weave. Wear side: 5-satin weave. Integrated SSB binder system joins the layers without exposure on the sheet side.
PT-3CSSB5220 is a 2/5-satin SSB triple-layer forming fabric for high-speed tissue and fine-paper machines. Its independently engineered paper and wear sides combine clean sheet formation with strong dimensional stability and abrasion resistance.
4,800–5,200 m³/m²h (303–330 CFM)
Air Permeability
1.05 mm
Caliper
Best Applications
Engineered for these paper grades and machine conditions
Why Choose PAPTEX
Mark-free sheet side
The integrated SSB binder does not penetrate the paper-side surface, helping protect tissue and fine-paper quality.
High-speed dewatering
The controlled permeability range supports rapid drainage while maintaining fibre support.
Wear resistance
The PET/PA 5-satin wear side distributes abrasion and helps maintain stable running geometry.
Custom engineering
Permeability, dimensions, seam and edge treatment can be matched to the customer machine.
Engineering Overview
Engineering overview
PT-3CSSB5220 is a 2/5-satin SSB triple-layer forming fabric for high-speed tissue and fine-paper machines. Its independently engineered paper and wear sides combine clean sheet formation with strong dimensional stability and abrasion resistance.
Construction
The fine 0.15 mm paper-side yarns provide high fibre support without binder marks. A 5-satin wear side with PET/PA monofilaments distributes contact wear, while the integrated SSB binder keeps both layers stable without penetrating the sheet-contact surface.
Operating window
Designed for Crescent formers, Fourdrinier, gap and hybrid formers operating at 800–1,800 m/min. Target air permeability is 4,800–5,200 m³/m²h at 100 Pa, with a typical operating tension of 5–8 kN/m.
Application support
PAPTEX can review machine drawings, furnish, vacuum profile and paper grade before production. Width, length, permeability, seam and edge treatment can be customized for the installation.
Verified Evidence
Evidence-Based Quality
Every claim backed by test reports, certifications, and factory data.
Test Report
EV-TEST-002Quantified + Conditioned (L4)
Tensile Strength Testing — ISO 9073-3
Per ISO 9073-3 standard N/cm · MD and CMD, 23°C ± 2°C, 50% ± 5% RH
Source: In-house universal testing machineEV-TEST-003Quantified + Conditioned (L4)
Hydrolysis Resistance Testing
Retained ≥85% tensile after 150 days % retention · at 120-160°C saturated steam
Source: Accelerated aging test, internal lab protocol PTL-027EV-TEST-004
Abrasion Resistance Testing — ISO 12947
Technical Specifications
| Design | 2/5-satin SSB triple-layer |
| Air permeability | 4,800–5,200 m³/m²h (303–330 CFM) |
| Thickness | 1.05 mm |
| Fibre Support Index | 159 |
| Paper-side yarn | 0.15 mm PET/PA |
| Wear-side yarn | 0.20 mm PET warp; 0.35 mm PET/PA weft |
Need a custom specification?
Our engineers can tailor the fabric to your machine parameters.
Performance Metrics
Key performance indicators measured under standard laboratory conditions.
Air Permeability4,800–5,200 m³/m²h (303–330 CFM)
Caliper1.05mm
Measured per ISO 9237 / ISO 9073 standards. Actual performance may vary with machine conditions.
Next Steps
Ready to Learn More?
Start with a datasheet or go straight to an engineer — no pressure.
📄
Download Datasheet
Full technical specifications, performance data, and installation guidelines.
Free & Instant📦Request Samples
Get a sample piece for evaluation. Standard A4 size, delivered in 5-7 days.
Email Required🔬Request Test Report
Full lab test report: ISO 9237 permeability, ISO 9073 tensile, ISO 12947 abrasion.
Email Required🔄Compare Technical Routes
See how this product compares with alternatives. Side-by-side technical analysis.
Downloads
Technical documentation for PAPTEX SSB Triple Layer Forming Fabric (High-Speed Dewatering)
Technical Comparison
Compare Center →Common Technical Route Comparisons
Compare technical routes across all machine sections to find the best solution.
Frequently Asked Questions
Common questions about PAPTEX SSB Triple Layer Forming Fabric (High-Speed Dewatering)
It is designed for Crescent formers, Fourdrinier, gap and hybrid formers, especially tissue and fine-paper machines operating at 800–1,800 m/min.
Solutions
Related Solutions
💡
Paper Machine Forming Section
Precision-engineered forming fabrics for every paper grade. From single-layer to high-speed triple-layer SSB designs, we provide the perfect wire for optimal sheet formation and drainage.
Learn More →💡
High-Speed Tissue Paper Production
Advanced clothing solutions for tissue paper machines, optimizing softness, bulk, and machine speed. Our fabrics ensure stable drainage and high-quality formation for premium tissue products.
Learn More →💡
Kraft & Packaging Paper Solutions
Heavy-duty forming and dryer fabrics designed for the high-load demands of kraft and corrugated paper production. Features extreme wear resistance and high dewatering capacity.
Learn More →Knowledge Center
Knowledge Center →Recommended Reading
Technical articles, guides, and resources for your application.
🌊Machine Section
Forming Section
Comprehensive guide to paper machine forming section: fabric selection, drainage optimization, sheet formation, and fiber retention. For Fourdrinier, twin-wire, and hybrid formers.
5 subtopicsExplore →
🔲Application Domain
Fabrics
In-depth knowledge about paper machine clothing: weave structures, material science (PET, PA, PPS), surface treatments, and performance characteristics across all fabric types.
3 subtopicsExplore →
Buyer Journey
Your Next Step
You are at stage 4/8: Product Detail
IndustryInquiry
1
2
3
4
5
6
7
8
Interested in PAPTEX SSB Triple Layer Forming Fabric (High-Speed Dewatering)?
Send us your paper machine specifications for a customized quotation.
